Каталог
Меню

Central office:

Phone: (061) 220-15-00 / (098) 441-15-41

Email: Office@mpka.com.ua

Branch Kyiv:

Phone: (044) 227-36-77 / (068) 774-74-77

Email: Kiev@mpka.com.ua

Branch Lviv :

Phone: (067 ) 612-38-37 / (067) 678-93-24

Email: rm.east@mpka.com.ua

Power cable VVG 0,66/1 кV

mednyj-kabel-vvg

Description:
VVG is a power cable with copper conductors, and PVC plastic insulation, as well as with an outer sheath of PVC plastic. It is used for transmission and distribution of the electric power, for internal and external installation.

    Required cable section

    Number in meters

    Design:
    Conductive copper conductor, single-wire round or multi-wire round, 1 or 2 classes of flexibility.
    In a four-core cable, they lived with a cross section of 70-240 mm2 and can be sector-shaped.
    Insulation and sheath – PVC compound.
    Core insulation marking is color (solid or stripe) or digital.
    Cables are produced with blue zero conductor. Insulated conductors of multicore cables are twisted into a core.

    Application:
    Cables are designed for the transmission and distribution of electrical energy in stationary installations for alternating voltage 0.3 / 0.5 kV or 0.6 / 1 kV with a frequency of 50 Hz for a rated voltage of 0.3 / 0.5 kV can be used for electrical systems 0, 38 / 0.66 / 1 kV.
    VVG wire and its modifications are used in many areas. It is also possible to operate on objects with a high level of humidity. They are no less popular for residential buildings. Design features and a high level of protection allow the use of products in open areas with low corrosive activity. It must also be ensured that the cable is not affected by tensile forces and there is no risk of damage or deformation.
    Installation is permissible horizontally, vertically or tilted. Depending on the type of wire, it can be laid in corrugated pipes, metal hoses, cable racks, blocks, bridges, elevators, on roofs or along the walls of buildings, in collectors, as well as in places with small vibrations.

    Specifications:

    Number and nominal cross-section of current-carrying conductors Outer cable diameter Permissible current loads at alternating current Operating temperature range Minimum bending radius when laying Phase insulation thickness Cable weight
    mm air soil °С mm mm kg/km
    1×1,5 7 22 30 – 50 + 50 70 0,8 50
    1×2,5 7 30 39 – 50 + 50 70 0,8 60
    1×4 8 39 50 – 50 + 50 80 1 80
    1х6 9 50 62 – 50 + 50 90 1 100
    1х10 9 68 83 – 50 + 50 90 1 150
    1х16 11 89 107 – 50 + 50 110 1 220
    1х25 12 121 137 – 50 + 50 120 1,2 320
    1х35 13 147 163 – 50 + 50 130 1,2 420
    1х50 15 179 194 – 50 + 50 150 1,4 550
    2х1,5 10 21 27 – 50 + 50 75 0,8 100
    2×2,5 11 27 36 – 50 + 50 82,5 0,8 120
    2×4 13 36 47 – 50 + 50 97,5 1 170
    2х6 14 46 59 – 50 + 50 105 1 210
    2х10 15 63 79 – 50 + 50 112,5 1 300
    2х16 17 84 102 – 50 + 50 127,5 1 420
    2х25 21 112 133 – 50 + 50 157,5 1,2 640
    2х35 23 137 158 – 50 + 50 172,5 1,2 830
    2х50 26 167 187 – 50 + 50 195 1,4 1110
    3х1,5 11 21 27 – 50 + 50 82,5 0,8 120
    3×2,5 12 27 36 – 50 + 50 90 0,8 150
    3×4 14 36 47 – 50 + 50 105 1 220
    3х6 15 46 59 – 50 + 50 112,5 1 280
    3х10 16 63 79 – 50 + 50 120 1 410
    3х16 18 84 102 – 50 + 50 135 1 580
    3х25 22 112 133 – 50 + 50 165 1,2 890
    3х35 24 137 158 – 50 + 50 180 1,2 1170
    3х50 28 167 187 – 50 + 50 210 1,4 1570
    3×2,5+1х1,5 13 27 36 – 50 + 50 97,5 0,8 180
    3×4+1х2,5 15 36 47 – 50 + 50 112,5 1 260
    3х6+1х4 16 46 59 – 50 + 50 120 1 340
    3х10+1х6 18 63 79 – 50 + 50 135 1 480
    3х16+1х10 20 84 102 – 50 + 50 150 1 710
    3х25+1х16 24 112 133 – 50 + 50 180 1,2 1090
    3х35+1х16 27 137 158 – 50 + 50 202,5 1,2 1370
    3х50+1х25 30 167 187 – 50 + 50 225 1,4 1840
    4х1,5 12 19 25 – 50 + 50 90 0,8 140
    4×2,5 13 25 33 – 50 + 50 97,5 0,8 190
    4×4 15 33 43 – 50 + 50 112,5 1 270
    4х6 16 42 54 – 50 + 50 120 1 360
    4х10 18 58 73 – 50 + 50 135 1 520
    4х16 20 78 94 – 50 + 50 150 1 760
    4х25 24 104 123 – 50 + 50 180 1,2 1150
    4х35 27 127 146 – 50 + 50 202,5 1,2 1550
    4х50 30 155 173 – 50 + 50 225 1,4 2050
    5х1,5 12 19 25 – 50 + 50 90 0,8 170
    5×2,5 14 25 33 – 50 + 50 105 0,8 230
    5×4 16 33 43 – 50 + 50 120 1 340
    5х6 17 42 54 – 50 + 50 127,5 1 440
    5х10 19 58 73 – 50 + 50 142,5 1 650
    5х16 22 78 94 – 50 + 50 165 1 960
    5х25 27 104 123 – 50 + 50 202,5 1,2 1480
    5х35 29 127 146 – 50 + 50 217,5 1,2 1940
    5х50 33 155 173 – 50 + 50 247,5 1,4 2580

      Fill out the form

        Send a request for a miscalculation

          FILL IN THE FORM

            FILL IN THE FORM